31 lines
1.3 KiB
Markdown
31 lines
1.3 KiB
Markdown
# Documentation : I²C : Teensy 2.0
|
|
|
|
## I²C Status Codes (for Master modes)
|
|
|
|
### Master Transmitter (datasheet section 20.8.1, table 20-3)
|
|
|
|
* `0x08` A START condition has been transmitted
|
|
* `0x10` A repeated START condition has been transmitted
|
|
* `0x18` SLA+W has been transmitted; ACK has been received
|
|
* `0x20` SLA+W has been transmitted; NOT ACK has been received
|
|
* `0x28` Data byte has been transmitted; ACK has been received
|
|
* `0x30` Data byte has been transmitted; NOT ACK has been received
|
|
* `0x38` Arbitration lost in SLA+W or data bytes
|
|
|
|
### Master Receiver (datasheet section 20.8.2, table 20-4)
|
|
|
|
* `0x08` A START condition has been transmitted
|
|
* `0x10` A repeated START condition has been transmitted
|
|
* `0x38` Arbitration lost in SLA+R or NOT ACK bit
|
|
* `0x40` SLA+R has been transmitted; ACK has been received
|
|
* `0x48` SLA+R has been transmitted; NOT ACK has been received
|
|
* `0x50` Data byte has been received; ACK has been returned
|
|
* `0x58` Data byte has been received; NOT ACK has been returned
|
|
|
|
-------------------------------------------------------------------------------
|
|
|
|
Copyright © 2012 Ben Blazak <benblazak.dev@gmail.com>
|
|
Released under The MIT License (MIT) (see "license.md")
|
|
Project located at <https://github.com/benblazak/ergodox-firmware>
|
|
|