238 lines
6.9 KiB
Nix
238 lines
6.9 KiB
Nix
# Edit this configuration file to define what should be installed on your system. Help is available in the configuration.nix(5) man page and in the NixOS manual (accessible by running ‘nixos-help’).
|
||
{ config, lib, pkgs, inputs, modulesPath, ... }:
|
||
|
||
{
|
||
imports = [ # Include the results of the hardware scan.
|
||
./apu2c4.nix
|
||
#<yori-nix/roles/homeserver.nix>
|
||
../../roles
|
||
inputs.nixos-hardware.nixosModules.pcengines-apu
|
||
"${modulesPath}/profiles/minimal.nix"
|
||
];
|
||
|
||
boot.loader.grub.enable = true;
|
||
boot.loader.grub.version = 2;
|
||
boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
|
||
|
||
boot.kernel.sysctl = {
|
||
"net.ipv6.conf.all.forwarding" = true;
|
||
"net.ipv6.conf.enp1s0.accept_ra" = 2;
|
||
};
|
||
# The global useDHCP flag is deprecated, therefore explicitly set to false here.
|
||
# Per-interface useDHCP will be mandatory in the future, so this generated config
|
||
# replicates the default behaviour.
|
||
networking.useDHCP = false;
|
||
networking.interfaces.enp1s0 = {
|
||
useDHCP = true;
|
||
tempAddress = "disabled";
|
||
};
|
||
#networking.interfaces.enp2s0.useDHCP = false;
|
||
networking.interfaces.enp3s0.useDHCP = false;
|
||
networking.interfaces.enp2s0 = {
|
||
tempAddress = "disabled";
|
||
ipv4.addresses = [{
|
||
address = "192.168.178.1";
|
||
prefixLength = 24;
|
||
}];
|
||
useDHCP = true;
|
||
};
|
||
# systemd.services.network-link-br0.unitConfig.After = lib.mkForce [ "network-pre.target" "br0-netdev.service" ];
|
||
# systemd.services.network-link-br0.unitConfig.BindsTo = lib.mkForce [ "br0-netdev.service" ];
|
||
networking.nat = {
|
||
enable = true;
|
||
externalInterface = "dslite1";
|
||
internalIPs = [ "192.168.178.1/24" ];
|
||
};
|
||
networking.defaultGateway = {
|
||
address = "192.0.0.1";
|
||
interface = "dslite1";
|
||
};
|
||
systemd.services.dslite1-netdev = {
|
||
wantedBy =
|
||
[ "network-setup.service" "sys-subsystem-net-devices-dslite1.device" ];
|
||
bindsTo = [ ];
|
||
partOf = [ "network-setup.service" ];
|
||
after = [
|
||
"network-pre.target"
|
||
"network-addresses-enp1s0.service"
|
||
"network-link-enp1s0.service"
|
||
];
|
||
before = [ "network-setup.service" ];
|
||
path = [ pkgs.iproute2 ];
|
||
serviceConfig = {
|
||
Type = "oneshot";
|
||
RemainAfterExit = true;
|
||
};
|
||
script = ''
|
||
ip tunnel add dslite1 mode ip4ip6 local 2a02:a212:2200:4c00:20d:b9ff:fe56:ba04 remote 2001:730:2000:2::31 encaplimit none
|
||
ip link set dslite1 up
|
||
'';
|
||
postStop = ''
|
||
ip link del dslite1 || true
|
||
'';
|
||
};
|
||
networking.interfaces.dslite1 = {
|
||
mtu = 1452; # todo: ipv6 fragmenting?
|
||
ipv4.addresses = [{
|
||
address = "192.0.0.2";
|
||
prefixLength = 24;
|
||
}];
|
||
};
|
||
# networking.bridges = {
|
||
# br0.interfaces = [ "enp2s0" "enp3s0" ];
|
||
# };
|
||
networking.dhcpcd.persistent = true;
|
||
# request prefix delegation
|
||
networking.dhcpcd.extraConfig = ''
|
||
noipv6rs
|
||
ipv6only
|
||
interface enp1s0
|
||
ipv6rs
|
||
iaid 1
|
||
ia_pd 1/::/60 enp2s0/0/64
|
||
'';
|
||
services.dnsmasq = {
|
||
enable = true;
|
||
servers = [ "8.8.8.8" "1.1.1.1" ];
|
||
};
|
||
services.dhcpd4 = {
|
||
interfaces = [ "enp2s0" ];
|
||
enable = true;
|
||
machines = [
|
||
{
|
||
hostName = "amateria";
|
||
ethernetAddress = "a8:a1:59:15:8b:63";
|
||
ipAddress = "192.168.178.42";
|
||
}
|
||
{
|
||
hostName = "blackadder";
|
||
ethernetAddress = "a8:a1:59:03:8a:75";
|
||
ipAddress = "192.168.178.33";
|
||
}
|
||
{
|
||
hostName = "frumar";
|
||
ethernetAddress = "bc:5f:f4:e8:42:9f";
|
||
ipAddress = "192.168.178.37";
|
||
}
|
||
{
|
||
hostName = "jarvis";
|
||
ethernetAddress = "18:1d:ea:35:13:58";
|
||
ipAddress = "192.168.178.34";
|
||
}
|
||
{
|
||
hostName = "jarvis-dock";
|
||
ethernetAddress = "64:4b:f0:10:05:f2";
|
||
ipAddress = "192.168.178.13";
|
||
}
|
||
{
|
||
hostName = "printer";
|
||
ethernetAddress = "30:05:5c:44:20:a7";
|
||
ipAddress = "192.168.178.26";
|
||
}
|
||
{
|
||
hostName = "raspberrypi";
|
||
ethernetAddress = "b8:27:eb:b9:ec:3a";
|
||
ipAddress = "192.168.178.21";
|
||
}
|
||
{
|
||
hostName = "smartMeter";
|
||
ethernetAddress = "5c:cf:7f:26:ca:91";
|
||
ipAddress = "192.168.178.30";
|
||
}
|
||
{
|
||
hostName = "gang-ap";
|
||
ethernetAddress = "b4:fb:e4:2d:fc:f3";
|
||
ipAddress = "192.168.178.32";
|
||
}
|
||
];
|
||
extraConfig = ''
|
||
subnet 192.168.178.0 netmask 255.255.255.0 {
|
||
option subnet-mask 255.255.255.0;
|
||
option broadcast-address 192.168.178.255;
|
||
option routers 192.168.178.1;
|
||
option domain-name-servers 192.168.178.1;
|
||
range 192.168.178.3 192.168.178.200;
|
||
}
|
||
'';
|
||
};
|
||
services.radvd = {
|
||
enable = true;
|
||
config = ''
|
||
interface enp2s0 {
|
||
AdvSendAdvert on;
|
||
prefix 2a02:a212:2200:4c70::/64 {
|
||
AdvOnLink on;
|
||
AdvAutonomous on;
|
||
};
|
||
};
|
||
'';
|
||
};
|
||
networking.firewall.allowedUDPPorts = [ 53 ];
|
||
networking.firewall.allowedTCPPorts = [ 53 ];
|
||
|
||
services.fstrim.enable = true;
|
||
|
||
# Select internationalisation properties.
|
||
# i18n = {
|
||
# consoleFont = "Lat2-Terminus16";
|
||
# consoleKeyMap = "us";
|
||
# defaultLocale = "en_US.UTF-8";
|
||
# };
|
||
|
||
# Set your time zone.
|
||
time.timeZone = "Europe/Amsterdam";
|
||
|
||
# List packages installed in system profile. To search, run:
|
||
# $ nix search wget
|
||
# environment.systemPackages = with pkgs; [
|
||
# wget vim
|
||
# ];
|
||
|
||
# Some programs need SUID wrappers, can be configured further or are
|
||
# started in user sessions.
|
||
# programs.mtr.enable = true;
|
||
# programs.gnupg.agent = {
|
||
# enable = true;
|
||
# enableSSHSupport = true;
|
||
# pinentryFlavor = "gnome3";
|
||
# };
|
||
|
||
# List services that you want to enable:
|
||
|
||
# Enable the OpenSSH daemon.
|
||
services.openssh.enable = true;
|
||
|
||
# Open ports in the firewall.
|
||
# networking.firewall.allowedTCPPorts = [ ... ];
|
||
# networking.firewall.allowedUDPPorts = [ ... ];
|
||
# Or disable the firewall altogether.
|
||
# networking.firewall.enable = false;
|
||
|
||
# Enable CUPS to print documents.
|
||
|
||
# This value determines the NixOS release from which the default
|
||
# settings for stateful data, like file locations and database versions
|
||
# on your system were taken. It‘s perfectly fine and recommended to leave
|
||
# this value at the release version of the first install of this system.
|
||
# Before changing this value read the documentation for this option
|
||
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
|
||
system.stateVersion = "20.09"; # Did you read the comment?
|
||
services.udisks2.enable = false;
|
||
boot.supportedFilesystems = lib.mkForce [ "ext4" ];
|
||
boot.initrd.supportedFilesystems = lib.mkForce [ "ext4" ];
|
||
security.polkit.enable = false;
|
||
nixpkgs.overlays = [
|
||
(self: super: {
|
||
dhcpcd = super.dhcpcd.overrideAttrs (o: rec {
|
||
pname = "dhcpcd";
|
||
version = "8.1.9";
|
||
src = self.fetchurl {
|
||
url = "mirror://roy/${pname}/${pname}-${version}.tar.xz";
|
||
sha256 = "1kzv61bgrd0zwiy6r218zkccx36j9p5mz1gxqvbhg05xn9g50alf";
|
||
};
|
||
patches = [ ];
|
||
});
|
||
})
|
||
];
|
||
}
|