Browse Source

add spotify scaling, libinput-gestures

master
Yorick van Pelt 4 years ago
parent
commit
99b12963bd
2 changed files with 93 additions and 0 deletions
  1. +89
    -0
      x/.config/libinput-gestures.conf
  2. +4
    -0
      x/.xprofile

+ 89
- 0
x/.config/libinput-gestures.conf View File

@ -0,0 +1,89 @@
# Configuration file for libinput-gestures.
#
# The default configuration file exists at /etc/libinput-gestures.conf
# but a user can create a personal custom configuration file at
# ~/.config/libinput-gestures.conf.
#
# Lines starting with '#' and blank lines are ignored. Currently
# "gesture" and "device" configuration keywords are supported as
# described below. The keyword can optionally be appended with a ":" (to
# maintain compatibility with original format configuration files).
#
# Each gesture line has 3 [or 4] arguments:
#
# action motion [finger_count] command
#
# where action and motion is either:
# swipe up
# swipe down
# swipe left
# swipe right
# pinch in
# pinch out
#
# command is the remainder of the line and is any valid shell command +
# arguments.
#
# finger_count is a single numeric digit and is optional (and is
# typically 3 or 4). If specified then the command is executed when
# exactly that number of fingers is used in the gesture. If not
# specified then the command is executed when that gesture is executed
# with any number of fingers. Gesture lines specified with finger_count
# have priority over the same gesture specified without any
# finger_count.
#
# Typically command will be xdotool, or wmctrl. See "man xdotool" for
# the many things you can action with that tool. Note that unfortunately
# xdotool does not work with native Wayland clients.
#
# Note the default is an "internal" command that uses wmctrl to switch
# workspaces and, unlike xdotool, works on both Xorg and Wayland (via
# XWayland). It also can be configured for vertical and horizontal
# switching over tabular workspaces, as per the example below. You can
# also add "-w" to the internal command to allow wrapping workspaces.
# Move to next workspace (works for GNOME/KDE/etc on Wayland and Xorg)
gesture swipe up _internal ws_up
#gesture swipe up xdotool key super+Page_Down
# Move to prev workspace (works for GNOME/KDE/etc on Wayland and Xorg)
gesture swipe down _internal ws_down
#gesture swipe down xdotool key super+Page_Up
# Browser go forward (works only for Xorg, and Xwayland clients)
gesture swipe left xdotool key alt+Right
# Browser go back (works only for Xorg, and Xwayland clients)
gesture swipe right xdotool key alt+Left
# Example of 8 static workspaces, e.g. using KDE virtual-desktops,
# arranged in 2 rows of 4 across using swipe up/down/left/right to
# navigate in fixed planes. Must match how you have configured your
# virtual desktops.
#gesture swipe up _internal --col=2 ws_up
#gesture swipe down _internal --col=2 ws_down
#gesture swipe left _internal --row=4 ws_up
#gesture swipe right _internal --row=4 ws_down
# GNOME SHELL open/close overview (works for GNOME on Wayland and Xorg)
#gesture pinch in dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'
#gesture pinch out dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'
gesture pinch in xdotool key ctrl+minus
gesture pinch out xdotool key ctrl+equal
# This application normally determines your touchpad device
# automatically. Some users may have multiple touchpads but by default
# we use only the first one found. However, you can choose to specify
# the explicit device name to use. Run libinput-list-devices to work out
# the name of your device (from the "Device:" field). Then add a device
# line specifying that name, e.g:
#
device DLL075B:01 06CB:76AF Touchpad
#
# Or you can choose to use ALL touchpad devices by setting the device
# name to "all". This reduces performance slightly so only set this if
# you need to.
#
#device all

+ 4
- 0
x/.xprofile View File

@ -1,2 +1,6 @@
export MOZ_USE_XINPUT2=1
if [ "$HOSTNAME" = jarvis ]; then
export SPOTIFY_DEVICE_SCALE_FACTOR=1.75
printf '%s\n' "on the right host"
fi

Loading…
Cancel
Save