152 lines
4.6 KiB
C
152 lines
4.6 KiB
C
/* ----------------------------------------------------------------------------
|
|
* ergoDOX controller: Teensy 2.0 specific code
|
|
* ----------------------------------------------------------------------------
|
|
* Copyright (c) 2012 Ben Blazak <benblazak.dev@gmail.com>
|
|
* Released under The MIT License (MIT) (see "license.md")
|
|
* Project located at <https://github.com/benblazak/ergodox-firmware>
|
|
* ------------------------------------------------------------------------- */
|
|
|
|
|
|
#include <avr/io.h>
|
|
|
|
#include "lib/data-types.h"
|
|
|
|
#define TEENSY_2_0_h_INCLUDE_PRIVATE
|
|
#include "teensy-2-0.h"
|
|
|
|
|
|
// processor frequency (from <http://www.pjrc.com/teensy/prescaler.html>)
|
|
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
|
|
#define CPU_16MHz 0x00
|
|
#define CPU_8MHz 0x01
|
|
#define CPU_4MHz 0x02
|
|
#define CPU_2MHz 0x03
|
|
#define CPU_1MHz 0x04
|
|
#define CPU_500kHz 0x05
|
|
#define CPU_250kHz 0x06
|
|
#define CPU_125kHz 0x07
|
|
#define CPU_62kHz 0x08
|
|
|
|
|
|
/* pin macros
|
|
* - note: you can move the `UNUSED`, `ROW`, and `COLUMN` pins around, but be
|
|
* sure to keep the set of pins listed in those catagories constant. other
|
|
* pins are not movable, and either are referenced explicitly or have macros
|
|
* defined for them elsewhere.
|
|
* - note: if you change pin assignments, please be sure to update
|
|
* "teensy-2-0.md".
|
|
*/
|
|
// --- helpers
|
|
#define TEENSYPIN_WRITE(register, operation, pin) \
|
|
_TEENSYPIN_WRITE(register, operation, pin)
|
|
#define _TEENSYPIN_WRITE(register, operation, pin_letter, pin_number) \
|
|
((register##pin_letter) operation (1<<(pin_number)))
|
|
|
|
#define TEENSYPIN_READ(pin) \
|
|
_TEENSYPIN_READ(pin)
|
|
#define _TEENSYPIN_READ(pin_letter, pin_number) \
|
|
((PIN##pin_letter) & (1<<(pin_number)))
|
|
|
|
#define SET |=
|
|
#define CLEAR &=~
|
|
|
|
// --- unused
|
|
#define UNUSED_0 B, 1 // SPI pin
|
|
#define UNUSED_1 B, 2 // SPI pin
|
|
#define UNUSED_2 B, 3 // SPI pin
|
|
#define UNUSED_3 D, 4 // hard to use with breadboard (on the end)
|
|
#define UNUSED_4 D, 5 // hard to use with breadboard (on the end)
|
|
#define UNUSED_5 E, 6 // hard to use with breadboard (internal)
|
|
|
|
// --- rows
|
|
#define ROW_0 F, 0
|
|
#define ROW_1 F, 1
|
|
#define ROW_2 F, 4
|
|
#define ROW_3 F, 5
|
|
#define ROW_4 F, 6
|
|
#define ROW_5 F, 7
|
|
|
|
// --- columns
|
|
#define COLUMN_0 B, 4
|
|
#define COLUMN_1 C, 6
|
|
#define COLUMN_2 C, 7
|
|
#define COLUMN_3 D, 2
|
|
#define COLUMN_4 D, 3
|
|
#define COLUMN_5 D, 7
|
|
#define COLUMN_6 B, 0
|
|
|
|
|
|
/* returns:
|
|
* - success: 0
|
|
* + will never return failure
|
|
*/
|
|
uint8_t teensy_init(void) {
|
|
CPU_PRESCALE(CPU_16MHz); // speed should match F_CPU in makefile
|
|
|
|
// onboard LED
|
|
DDRD &= ~(1<<6); // set D(6) as input
|
|
PORTD &= ~(1<<6); // set D(6) internal pull-up disabled
|
|
|
|
// keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
|
|
DDRB |= 0b11100000; // set B(7,6,5) as output
|
|
TCCR1A = 0b10101001; // set and configure fast PWM
|
|
TCCR1B = 0b00001001; // set and configure fast PWM
|
|
|
|
// I2C (TWI)
|
|
// on pins D(1,0); leave them alone here so the TWI library can do as
|
|
// it wishes
|
|
|
|
// unused pins
|
|
// --- set as input
|
|
TEENSYPIN_WRITE(DDR, CLEAR, UNUSED_0);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, UNUSED_1);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, UNUSED_2);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, UNUSED_3);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, UNUSED_4);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, UNUSED_5);
|
|
// --- set internal pull-up enabled
|
|
TEENSYPIN_WRITE(PORT, SET, UNUSED_0);
|
|
TEENSYPIN_WRITE(PORT, SET, UNUSED_1);
|
|
TEENSYPIN_WRITE(PORT, SET, UNUSED_2);
|
|
TEENSYPIN_WRITE(PORT, SET, UNUSED_3);
|
|
TEENSYPIN_WRITE(PORT, SET, UNUSED_4);
|
|
TEENSYPIN_WRITE(PORT, SET, UNUSED_5);
|
|
|
|
// rows
|
|
// --- set as input (hi-Z)
|
|
TEENSYPIN_WRITE(DDR, CLEAR, ROW_0);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, ROW_1);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, ROW_2);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, ROW_3);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, ROW_4);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, ROW_5);
|
|
// --- set internal pull-up disabled
|
|
TEENSYPIN_WRITE(PORT, CLEAR, ROW_0);
|
|
TEENSYPIN_WRITE(PORT, CLEAR, ROW_1);
|
|
TEENSYPIN_WRITE(PORT, CLEAR, ROW_2);
|
|
TEENSYPIN_WRITE(PORT, CLEAR, ROW_3);
|
|
TEENSYPIN_WRITE(PORT, CLEAR, ROW_4);
|
|
TEENSYPIN_WRITE(PORT, CLEAR, ROW_5);
|
|
|
|
// columns
|
|
// --- set as input
|
|
TEENSYPIN_WRITE(DDR, CLEAR, COLUMN_0);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, COLUMN_1);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, COLUMN_2);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, COLUMN_3);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, COLUMN_4);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, COLUMN_5);
|
|
TEENSYPIN_WRITE(DDR, CLEAR, COLUMN_6);
|
|
// --- set internal pull-up enabled
|
|
TEENSYPIN_WRITE(PORT, SET, COLUMN_0);
|
|
TEENSYPIN_WRITE(PORT, SET, COLUMN_1);
|
|
TEENSYPIN_WRITE(PORT, SET, COLUMN_2);
|
|
TEENSYPIN_WRITE(PORT, SET, COLUMN_3);
|
|
TEENSYPIN_WRITE(PORT, SET, COLUMN_4);
|
|
TEENSYPIN_WRITE(PORT, SET, COLUMN_5);
|
|
TEENSYPIN_WRITE(PORT, SET, COLUMN_6);
|
|
|
|
return 0; // success
|
|
}
|
|
|